2018 Morris Industries Bale Carriers 12SR

Faster than the competition because it picks up two bales per loader cycle, the Auto Align bale stacking system allows 1 person to roadside 40-60 ton per hour. The 12SR stacks twelve (3X3) dry bales six high and two wide. Bales can be picked up and stacked on or off strings.

Features may include:

Bales can be picked on the go at speeds up to 5 mph. The bales will slide sideways and turn to fit between the arms as the Bale Skoop is driven forward.

The grab hooks come out from behind the loader and holds the first bale in place. One hydraulic cylinder is used to activate the four large hooks. Unique floating pipes are connected to the ends of the alignment arms. With the loader raised 8 to 12 inches the pipes slide down to allow the alignment arms to hold the second bale creating the forward stair step to each row.

Alignment arms align the first bale to the center of the machine. Then the grab hooks automatically engage to hold the first bale in place allowing the alignment arms to open and engage the second bale. The inclined bed of the Bale Skoop allows bales to slide to the back.

The top bale is held in place by the loader. At the stacking location, steering with the hitch allows the operator to see the existing stack so the load can be easily aligned. Once the bed is vertical, the alignment arms are opened, and the Bale Skoop is driven forward to remove the forklift teeth from under the stack.