2018 Fecon Stumpex

When operating your Stumpex make sure to have PPE safety gear on and your carrier has an enclosed cab and door closed. Be sure no one is within 15 feet of the working area to ensure safety. Always survey your working area for obstructions and call before you dig to avoid utilities.

Always properly maintain your Stumpex by inspecting daily and making sure your blades are properly sharpened. Stumpex blades should maintain a 30 degree angle to work efficiently. Remember to always use your Fecon provided Fecon gauge.

Features may include:

• No Carbide Tools to Replace

• Low Maintenance

• Low RPM Auger Bit (7-16 RPM) Leads to Easy Clean-up and has no High Speed Flying Debris for Safer Work Zone

• Fraction of Work Time Compared to Conventional Stumpers

• Mount on Skid Steers with 20 - 42 GPM / 2,500 to 4,000 psi

• Mount on excavators with 30-55 GPM / 3500 to 5000 psi

• Mount on exacvators with 12-20 ton rating

• Any Species of Wood

• Bores 20 into Ground while Cutting Feeder Roots

• Durable AR500 Steel Blades make the Stumper Tough, Even in Rocky Conditions

• Safer than Conventional Stumpers due to Slow Rotation Auger Bit Action